RMS900-108218 | Kit Stator + CDI Box for Arctic Cat Jag 340 440 | Panther 440 500 | El Tigre 6000 530 | 1984-1997 | 3005-375 / 3005-066 |

$379.00

Stator :

Dimensions :
Interior diameter: 40 mm
Exterior diameter: 113 mm
Thickness: 18 mm
Length of wires stator to plug: 240 mm

Other specifications :
Number of wires: 8
Number of plugs: 2
Number of pins: 8

Wire to wire resistance :
Alternator: Yellow to Yellow = 0.5 ohms +/-20%
Source: Black/Red to Black/White = 200 ohms +/-20%
Source 2: White/Red to Black/Red = 20 ohms +/-20%

CDI Box :

Dimensions:
Height: 40.5 mm
Length: 65 mm
Width: 93 mm
Distance between fixation holes: 74 mm

Other specifications:
Number of plugs: 3
Number of pins: 6

Please note: The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box.

Available on backorder

SKU: RMS900-108218 Categories: CDI Box, RMStator, Stator

Description
Additional information
OEM AND OTHER PART NUMBERS
About brand

Description

Brand new aftermarket stator + CDI Box

All product shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Stator :

Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade of lamination materials
Highest grade of copper winding, resistant to 200 degrees Celsius.
Connector included
Back Plate included

Note : There are 2 possible stators for the OEM 3005-346, please compare your original part with our picture.

CDI Box :

Our PeakRPM CDI Box provides the optimal output for your ride
Enjoy fast & easy installation with our plug & play OEM design
OEM-grade electronic components and printed circuit boards for long-term reliability and performance
90% of ignition issues are caused by a faulty stator. Fully test ignition components before buying.

Before installing your new Stator + CDI Box

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors

Our parts may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator + CDI box are designed as a direct plug-in replacements and should be used as such.

When bolting stator in, always use locking compound.

Additional information

Weight	1.13 kg
Dimensions	33.02 × 5.08 × 22.86 cm
Brand	RMSTATOR
Fitment Type	Guaranteed Fit

OEM AND OTHER PART NUMBERS

OEM NUMBER

108218-R00, 108218.R00, 108218 R00, 108218R00

ADDITIONAL NUMBER

RMS900-108218

About brand

DO NOT MANUFACTURE PARTS, DESIGN PERMANENT SOLUTIONS

We cultivate our actions towards finding permanent solutions. There is no way, us, as customers, would like to replace a part again and again. This mindset forces our team to design to fix, to conquer these pesky electrical failures in powersport.

GOOD DESIGN PRODUCE GOOD PRODUCTS. EFFICIENT DESIGN CREATES STELLAR PRODUCTS.

We are committing to innovate in finding clever ways to design more efficient parts that produce better results than any other part on the market.

WE ALL ARE CUSTOMERS ELSEWHERE.

In our shopping journey for buying our daily goods, we all expect to be treated with respect in a relation that makes us feel welcomed. Our team is encouraged to elevate that standard even higher and to provide all the information necessary for an easy and reliable installation.

OWN YOUR CUSTOMER PAIN LIKE IT IS YOURS

We own powersport rides ourselves. We feel the pain of dealing with unsolvable troubleshooting on our rides. We are committed in manufacturing complete solutions to known or I-would-never-have-suspected issues that are plaguing your rides... and ours.